Samsung J8 Frp Lock Remove Google Account Lock Bypass

Samsung J8 Frp Lock Remove  Google Account Lock Bypass
How To Remove Frp lock Samsung J8
How To Remove Frp Lock Google Account Lock Samsung J8
Samsung J8 Frp Lock Remove Google Account Bypass Done
Follow The Steps. 
Step.1. you need a android mobile Android 7.0.
Step.2.Download And install PB.FRP-com Apk.
Step.3.cannact wifi on your lock mobile.
Step.4.Insert sim a active on lock mobile.
Step.5. Download And install PB.FRP-com Apk.
Step.6.Send link www.youtube .com on Insert sim a active sim namber.
Step.7.Send puss sms open automatic you Jast Prss Ok open youtube.
Step.8.type mobile doctor 360 play fast video open description link jast click link.
Step.9.automaticle open chrome browser search quickshortcutmaker And Download apk.
Step.10.open  automatic quickshortcutmaker apk install it.
Step.11.type Home Press Home open to Try you go to home skin.
Step.12.search google account manager 6.0 or 8.0 apk Download The Apk and install it.
Step.13.open  quickshortcutmaker type google account manager.
Step.14.you log in your gmaile id .power off your phone power on agin your phone.
Step.15.you bypass google account lock. just rest your phone settings.

Download PB.FRP-com Here
Download quickshortcutmaker apk Here
Download Google Account Manager 8.0 Here
                                Videos Link 
 

InfinityBox Install CM2MT2 V2.04 Download Free

InfinityBox Install CM2MT2 V2.04 Download Free
InfinityBox Install CM2MT2 V2.04 Without Password
Infinity CM2MT2 v2.04: New chips and features activated !

Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated 
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated

FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated

MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )

Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify  ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing

InfinityBox Install CM2MT2 V2.04 Download Here

Symphony b17I Flash File (Stock Rom) Firmware MT6261

Symphony b17I Flash File (Stock Rom) Firmware MT6261
Symphony b17I Flash File (Stock Rom) Free Download
Symphony b17I Flash File (Stock Rom) Without Password
Symphony b17I Flash File Hang Logo Dead Recovery Fix
How To Flash Symphony b17I Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Symphony b17I Flash File (Stock Rom) Firmware MT6261
Symphony b17I Flash File (Stock Rom) Free Download
Symphony b17I Flash File (Stock Rom) Without Password
Symphony b17I Flash File (Stock Rom) Firmware Download Here

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 66 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 29E21CC231C2DECFF7CDB5AE610A9525
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : HONGYU61M_11C_PCB01_gprs_MT6261_S00.B17I_HW1_V5.bin
FileVersion : B17I_HW1_V5
Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gprs_MT6261_S00.B17I_HW1_V5.bin

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

 

5Star GR7 Flash File (Stock Rom) Firmware MT6261

5Star GR7 Flash File (Stock Rom) Firmware MT6261
5Star GR7 Flash File (Stock Rom) Firmware Free Download
5Star GR7 Flash File (Stock Rom) Firmware Without Password
5Star GR7 Flash File (Stock Rom) Firmware Hang Logo Dead Fix
How To Flash 5Star GR7 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

5Star GR7 Flash File (Stock Rom) Firmware MT6261
5Star GR7 Flash File (Stock Rom) Firmware Free Download 
5Star GR7 Flash File (Stock Rom) Firmware Without Password
5Star GR7 Flash File (Stock Rom) Firmware Download Here 
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 66 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 392F227900BD420166C9366F8954E152
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.L2016_XSD_W21_PLUS_5STAR_GR7_V2_0_20180925.bin
FileVersion : L2016_XSD_W21_PLUS_5STAR_GR7_V2.0_20180925
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.L2016_XSD_W21_PLUS_5STAR_GR7_V2_0_20180925.bin

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!


Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download

Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download
Nokia C2-03 RM-702 Flash File (Stock Firmware) Without Passwod
Nokia C2-03 RM-702 Flash File Hang Logo Dead Recovery Fix
Nokia C2-03 RM-702 Flash File (Stock Firmware) 100% Tested
How To Flash Nokia C2-03 RM-702 Flash File (Stock Firmware) 
Follow The Steps.  
Step.1.Dwonload the file
Step.2.unzip use7 zip
Step.3.install nokia connectivity cable driver software 

Step.4.Then open a flashing tool for example infinity box best atf box Ufs Box  
Step.5.Select the flash file at flashing tool.
Step.6.Push the USB in your phone without battery.
Step.7.At last you must be setup the battery needed typing booting mode then will be start flash 


Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download
Nokia C2-03 RM-702 Flash File (Stock Firmware) Without Passwod
Nokia C2-03 RM-702 Flash File Hang Logo Dead Recovery Fix
Nokia C2-03 RM-702 Flash File (Stock Firmware) Download Here

Nokia 6301 Flash File (Stock Rom) Firmware RM-322

Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Nokia 6301 Flash File (Stock Rom) RM-322 Free Download
Nokia 6301 Flash File RM-322 Hang logo Dead Fix File
Nokia 6301 Flash File Firmware RM-322 Without Password
How To Flash Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Follow The Steps.  
Step.1.Dwonload the file
Step.2.unzip use7 zip
Step.3.install nokia connectivity cable driver software 

Step.4.Then open a flashing tool for example infinity box best atf box Ufs Box  
Step.5.Select the flash file at flashing tool.
Step.6.Push the USB in your phone without battery.
Step.7.At last you must be setup the battery needed typing booting mode then will be start flash 



Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Nokia 6301 Flash File (Stock Rom) RM-322 Free Download
Nokia 6301 Flash File RM-322 Hang logo Dead Fix File
Nokia 6301 Flash File Firmware RM-322 Download Here

InfinityBox CM2SPD V1.27 Free Download

InfinityBox Install CM2SPD V1.27 Free Download
=== v1.27 ===
Infinity Chinese Miracle-2 SPD/Spreadtrum v1.27 - SC773x Android 7 and FP Forensic

 SP Platform:

 Activated SC773x Android 7 support
 Identify (service/boot)
 Read firmware ( SC/PAC )
 Write Firmware ( SC/PAC )
 Reset Settings/Format FS
 Reset FRP
 Flash erase
 NVM operations: Read, Write, Clear, Fix BB
 Repair Security (Normal and Flash Mode)
 SP Unlock
 eMMC test
 HW info read/write

- Service operations improved
 FRP reset improved

- Firmware reader updated
 New types supported

 FP Platform:

- Main
 Revised bootloader package
 Booting issues on some models should be fixed

- Unique UserData fatures activted!
 SC6500, SC6530, SC6531: Activated Direct PhoneBook recovery/extraction!
  Automatic detection of different phonebook types
  Support recovery for deleted/changed records !
  It's possible to make recovery for device with ANY state as soon as it can be connected to PC ( except Format FS / Dump reflash )

 SC653x Samsung: Revised PhoneBook recovery/extraction
  Support recovery for deleted/changed records !

- Other
 Some bugfixes and improvements at all
 FlashLoader package updated
InfinityBox Install CM2SPD V1.27 Free Download Here

InfinityBox Install CM2SCR V1.03 Free Download

InfinityBox Install CM2SCR V1.03 Free Download
Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated

Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices

Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.
InfinityBox Install CM2SCR V1.03 Free Download Here

InfinityBox Install CM2QLM v1.16 Free Download

InfinityBox Install CM2QLM v1.16 Free Download
Infinity Chinese Miracle-2 QLM v1.16 - Lot of new models and features !

New CPU support
 Qualcomm MSM 8905 (Mobile Platform 205)
 Qualcomm MSM 8609 (SnapDragon 210)
 Qualcomm MSM 8953 (SnapDragon 625 pro)

Supported CPU List:
 Qualcomm MSM 8210 (SnapDragon 200)
 Qualcomm MSM 8212 (SnapDragon 200)
 Qualcomm MSM 8610 (SnapDragon 200)
 Qualcomm MSM 8612 (SnapDragon 200)
 Qualcomm MSM 8226 (SnapDragon 400)
 Qualcomm MSM 8626 (SnapDragon 400)
 Qualcomm MSM 8926 (SnapDragon 400)
 Qualcomm MSM 8228 (SnapDragon 400)
 Qualcomm MSM 8628 (SnapDragon 400)
 Qualcomm MSM 8928 (SnapDragon 400)
 Qualcomm APQ 8009 (SnapDragon 210)
 Qualcomm MSM 8209 (SnapDragon 210)
 Qualcomm MSM 8609 (SnapDragon 210)
 Qualcomm MSM 8905 (Mobile Platform 205)
 Qualcomm MSM 8909 (SnapDragon 210)
 Qualcomm MSM 8916 (SnapDragon 410)
 Qualcomm MSM 8917 (SnapDragon 425)
 Qualcomm MSM 8929 (SnapDragon 415)
 Qualcomm MSM 8936 (SnapDragon 610)
 Qualcomm MSM 8937 (SnapDragon 430)
 Qualcomm MSM 8939 (SnapDragon 615)
 Qualcomm MSM 8940 (SnapDragon 435)
 Qualcomm MSM 8974/A/AA/AB (SnapDragon 801)
 Qualcomm MSM 8952 (SnapDragon 617)
 Qualcomm MSM 8953 (SnapDragon 625/pro/plus)
 Qualcomm MSM 8956 (SnapDragon 650)
 Qualcomm MSM 8976 (SnapDragon 652)
 Qualcomm MSM 8976 Pro (SnapDragon 653)
 Qualcomm MSM 8992 (SnapDragon 808)
 Qualcomm MSM 8994 (SnapDragon 810)
 Qualcomm MSM 8996 (SnapDragon 820)
 Qualcomm MSM 8996 Pro (SnapDragon 821)
 Qualcomm MSM 8998 (SnapDragon 835)

- Main
 FH Protocol updated and revised
 Core revised, no more stuck boot problems
 MSM8953 Pro new revision supported
 MSM8905 supported
 MSM8609 supported
 Test support: SDM660
 Test support: SDM630

- Flasher
 SafeRegions detection improved
 Factory firmware handling optimized

- More Secure and Generic types supported
 +50 UNIQUE loaders included in internal DB!
 Now QLM cover 230+ UNIQUE SECURE AND GENERIC TYPES! As nobody else :)
 Software DO NOT require any kind of manual loaders selection, bruteforce etc.
 MSM8909: ZTE, Asus, Alcatel and some Oppo
 MSM8916: Coolpad, Alcatel and some Oppo
 MSM8976: Vivo and others
 MSM8953: Vivo and others
 MSM8956: Generic Secure Chinese types, Alcatel, Lenovo and some others
 MSM8936: Cover more Cyanogen based models ( include WileyFox and some rest )
 MSM8937: Asus and other secure types
 MSM8998: Nokia 8, and other Xiaomi models
 MSM8905: Generic, LYF and other secure types

- Service operations improved
 Enabled QCN operations
  - Allow read calibrations and secure memory in XQCN format
  - Allow write calibrations and security memory in XQCN format
  - QCN verify, automatic security field update
 Enabled Security repair feature
  - Default "Clean memory mode" for start. Use with backup, wipe and restore
 Basic DiagInfo reading during Diag operations
 ADB layer activated
 Enable Diag mode option released
  - Allow enable diagnostic port on device [ ROOT REQUIRED! ]

- Firmware Reader engine updated
 A/B memory architecture supported - allow read FW from newer devices with Android A/B update system!
 New types supported ( brand-specific and generic types )
 Files verification revised

 -> Unlike other "solutions" CM2 make FIRMWARE BUT NOT A USELESS PLAIN DUMP ( i.e. cloning )
 -> That means all device unique data, security etc. will remain safe after flashing !
 
- MemoryTool updated
 Optimized WIPE operations
 Fixed some VCL errors on Win7
 BootConfigaration revised

- Other
 DataDirect engine updated
 Loader database updated
  - 50+ new secure loaders
  - Updated old and generic loaders
 Some other improvements and fixes
 Better UFS memory details logging

- Notes
  -> Nokia QLM: since Nokia use own format of security and memory/ota structure - for COMPLETE service you should use BEST!
     QLM offer basic support: FRP, Reset, Identify and backup features
  -> Special THANKS to ALL our users who help us with sending reports, reporting problems and bugs, help with files and other things ! 
InfinityBox Install CM2QLM v1.16 Free Download Here

CM2MTK Secure boot error Soloution Free Without Password

CM2MTK Secure boot error Soloution Free Without Password.
CM2MTK Secure boot error Soloution 8.0 Free Download
CM2MTK Oreo 8.0 Boot File Free Download All Boot File
CM2MTK Secure boot error Soloution Free Without Password.
CM2MTK Boot File 7.0 8.0 Bootloader File Fix
CM2MTK Secure boot error Soloution 8.0 Free Download
CM2MTK Oreo 8.0 Boot File Free Download All Boot File
CM2MTK Secure boot error Problem Fix File Download Here

Infinity Box CM2MT2 V2.03 Free Download

Infinity Box CM2MT2 V2.03 Free Download
MT817x Series support, new features

Base:
Base     - DA v1844 support tested on all platforms
Base     - MT8172 support activated
Base     - MT8173 support activated
Base     - MT8176 support activated
Base     - Info reading improved ( in some cases device info can be empty )
Base     - Startup issues on some machines fixed
Base     - Autoupdate feature revised

MemoryTool:
MemTool  - Partition types detection improved
MemTool  - InitPreloader option revised

Flasher:
Flasher  - Activated flashing support for LEGACY signed FW types ( ver3, ver4 )
Flasher  - Customization model revised
Flasher  - DL Fix / ADL Checksum revised
Flasher  - Cheksum issue on 6572/6582 fixed 
Flasher  - MT6570 NAND support fixed
Flasher  - Flashing support for secure FW readout from LEGACY signed devices ( fused )
Flasher  - More info, state and other debug stuff during secure types flashing

FWReader:
FWReader - Activated reading for LEGACY secured phones ( for fused devices )
FWReader - Secure state and signature type info during reading
FWReader - Secure workaround for cpu-paired security on fused devices ( FW completey safe for flashing )
FWReader - More types supported for safe read
FWReader - Info reading improved ( in some cases device info can be empty )

Other:
Other    - Preloader parsing issues with some new platforms fixed
Other    - Lot of small fixes and changes, reported by users
Other    - BootHelper updated

Service:
Service  - Security repair revised
Service  - FixDL option activated
Service  - Format FS revised, ENCRYPTION issues, bootloop issues fixed on some platforms/devices

Platform:
Platform - MT8172 support activated
Platform - MT8173 support activated
Platform - MT8176 support activated
Platform - MT2601 support activated
Platform - MT6582 support optimized
Platform - MT6572 support optimized

Infinity Box CM2MT2 V2.03 Free Download Here

Infinity Box CM2MTK V1.58 Free Download

Infinity Box CM2MTK V1.58 Free Download
Tampering or changing IMEI is illegal in many countries. This software has certain functions for IMEI repair. This software should not be used for any other purpose other than original IMEI repair.
Please confirm you agree to the condition of using that option only for repair IMEI.

=== v1.58 ===
Infinity-Box Chinese Miracle-2 MTK/Mediatek v1.58 - New models and features

 Mediatek SP Platform:

 - Flash Engine updated
   MT6572, MT6582: Secure Flash Engine Enabled 
   Improved Secure Firmware Flashing support for MT67xx line
   New factory file types supported

 - Service:  
   FixDL operation improved
   eMMC ReadOnly test improved
   >Improved testing chaing, verification
   >Enabled support for erased/damaged devices
    In case of erased/damaged phone CM2 can now make forced test
    It still safe and NOT destroy phone firmware
  
 - Firmware reader engine updated
  New types supported
  Brand-specific changes

 - New models included:
  LG X135
  LG X145
  SPUnlock, Repair Security, Reset Settings, Forensic, UserLocks etc.
  Flashing: Support ONLY Signed Factory Firmwares! 
  Do not need anymore hold volume keys etc.
  Firmwares for supported secure phones you can find on support
 
 - Other
  FlashLoaders package updated
  DRAM Init database updated. More new FlashTypes supported.
  MT6573 and MT6575/MT6577 support has been broken. Fixed.
  Other changes and improvements at all
Infinity Box CM2MTK V1.58 Free  Download Here
 InfinityBox_update_CM2MTK_Supplementary-files-package_v1.58 Download Here

Zelta A100 Firmware (Stock Rom) Flash File MT6592 Android 4.4.2

Zelta A100 Firmware (Stock Rom) Flash File MT6592 Android 4.4.2
Zelta A100 Firmware (Stock Rom) Flash File MT6592 Free Download
Zelta A100 Firmware (Stock Rom) Flash File Without Password
Zelta A100 Firmware (Stock Rom) Flash File Hang Logo Dead Recovery
How To Flash Zelta A100 Firmware (Stock Rom) Flash File 
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig
 

Zelta A100 Firmware (Stock Rom) Flash File MT6592 Android 4.4.2
Zelta A100 Firmware (Stock Rom) Flash File MT6592 Free Download
Zelta A100 Firmware (Stock Rom) Flash File Without Password
Zelta A100 Firmware (Stock Rom) Flash File Download Here

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142018F0ADC7D624D
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142018F0ADC7D624D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 7A5DF7541CB74D878A12AC49992ACF14
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Zelta
ProdName  : A100
ProdModel : A100
Device    : A100
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_techain92_wet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / techain92_wet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1273 MiB
Scatter saved to : C:\Users\md arif\Desktop\SONY-X-BO-V3+\MT6592__Zelta__A100__A100__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

 

Vsun Mercury Tough Firmware (Stock Rom) Flash File MT6737M Android 7.0

Vsun Mercury Tough Firmware (Stock Rom) Flash File Without Password
Vsun Mercury Tough Firmware (Stock Rom) Flash File Free Download
Vsun Mercury Tough Firmware (Stock Rom) Flash File Hang logo Dead Fix
Vsun Mercury Tough Firmware (Stock Rom) Flash File MT6737M Android 7.0
How To Flash Vsun Mercury Tough Firmware (Stock Rom) Flash File
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Vsun Mercury Tough Firmware (Stock Rom) Flash File Without Password
Vsun Mercury Tough Firmware (Stock Rom) Flash File Free Download
Vsun Mercury Tough Firmware (Stock Rom) Flash File Hang logo Dead Fix
Vsun Mercury Tough Firmware (Stock Rom) Flash File Download Here 

Phone found! [ 278 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 460001154D32584E4C830142333EF8E4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D4201834CE4F86433
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xB58BA67CFD1D41632267CBB4B39AE16F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Vsun
ProdName  : MERCURY_Tough
ProdModel : MERCURY Tough
Device    : MERCURY_Tough
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P50

[Read Ok] : preloader_vs6737m_35_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / vs6737m_35_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3162 MiB
Scatter saved to : C:\Users\arif\Desktop\New folder\MT6737M__Vsun__MERCURY_Tough__MERCURY_Tough__7.0__alps-mp-n0.mp1-V1.0.2_vs6737m.35.n_P50\

All done!

 

Symphony E79 Firmware (Stock Rom) Flash File MT6572

Symphony E79 Firmware (Stock Rom) Flash File MT6572
Symphony E79 Firmware (Stock Rom) Flash File Free Download
Symphony E79 Firmware (Stock Rom) Flash File Without Password
Symphony E79 Firmware Flash File Hang logo Dead Recovery Fix
How To Flash Symphony E79 Firmware (Stock Rom) Flash File
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Symphony E79 Firmware (Stock Rom) Flash File MT6572
Symphony E79 Firmware (Stock Rom) Flash File Free Download
Symphony E79 Firmware (Stock Rom) Flash File Without Password
Symphony E79 Firmware Flash File Dead Recovery Fix Download Here
Boot Ok!

Reading Flash Content now ...

Brand     : Symphony
ProdName  : E79
ProdModel : E79
Device    : E79
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : UP40

[Read Ok] : preloader_up40_h405_sy_e79.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / up40_h405_sy_e79 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 952 MiB
Scatter saved to : C:\Users\arif\Desktop\New folder\MT6572__Symphony__E79__E79__4.4.2__UP40\

All done!




LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Android 6.0

LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Android 6.0
LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Free Download
LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Without Password
LiteTel LT5002 Firmware (Stock Rom) Flash File Hang Logo Dead Recovery Fix
How To Flash LiteTel LT5002 Firmware (Stock Rom) Flash File 
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


 

LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Android 6.0
LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Free Download
LiteTel LT5002 Firmware (Stock Rom) Flash File MT6580 Without Password
LiteTel LT5002 Firmware (Stock Rom) Flash File Hang Logo Fix Download Here

 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+4096Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 8801034E4361726420 : 00000000000000
 EMMC UA SIZE: 0x1d2000000    
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 -Reading GPT Drive OK
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM279)
 Build ID: MRA58K
 Display ID: LT5002_1_XXX_V1.0_T960-W-V2.2
 Version: 6.0
 Build Date: 2018年 03月 13日 星期二 18:23:07 CST
 Model: LT5002
 Brand: LT5002
 Device: t961w_v1_ap_lhtt_m50d2_60
 Manufacturer: LT5002
 Mediatek Version Release: LT5002_1_XXX_V1.0_T960-W-V2.2
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354927090054368
 IMEI[2] from NVRAM: 354927090054376
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000      
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing teksunhw ......
 Reading:  BEGIN: 0xa800000        - LEN: 0x100000       
 Start processing txd ......
 Reading:  BEGIN: 0xa900000        - LEN: 0xcf00000      
 Start processing system
 Reading:  BEGIN: 0x17800000       - LEN: 0x9b800000     
 Saved to : C:\Users\arif\Documents\Android_MTK\firmware_backup\MT6580_EMMC_LT5002_LT5002_6_0_LT5002_1_XXX_V1_0_T960-W-V2_2(2019_01_19_10_45)
 Wait untill phone will start charging.
 All done.

Hotwav Venus R10 Firmware Flash File (Stock Rom) After Flash Dead Fix File

Hotwav Venus R10 Firmware Flash File (Stock Rom) After Flash Dead Fix File
Hotwav Venus R10 Firmware Flash File After Flash Dead Fix Free Download
Hotwav Venus R10 Flash File After Flash Dead Fix File Without Password
Hotwav Venus R10 Firmware Flash File Hang Logo After Flash Dead Fix
How To Flash Hotwav Venus R10 Firmware Flash File After Flash Dead Fix Free
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Hotwav Venus R10 Firmware Flash File (Stock Rom) After Flash Dead Fix File
Hotwav Venus R10 Firmware Flash File After Flash Dead Fix Free Download
Hotwav Venus R10 Flash File After Flash Dead Fix File Without Password
Hotwav Venus R10 Firmware Flash File Hang Logo Dead Fix Download Here

Kingstar Crystal 1 Flash File (Stock Rom) Firmware SPD6531E

Kingstar Crystal 1 Flash File (Stock Rom) Firmware  SPD6531E
Kingstar Crystal 1 Flash File (Stock Rom) Firmware Free Download
Kingstar Crystal 1 Flash File (Stock Rom) Firmware Without Password
Kingstar Crystal 1 Flash File  Firmware Dead Recovery Hang Logo Fix
How To Flash Kingstar Crystal 1 Flash File (Stock Rom)
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig




 

Kingstar Crystal 1 Flash File (Stock Rom) Firmware  SPD6531E
Kingstar Crystal 1 Flash File (Stock Rom) Firmware Free Download
Kingstar Crystal 1 Flash File (Stock Rom) Firmware Without Password
Kingstar Crystal 1 Flash File Dead Recovery Hang Logo Fix Download Here

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\BAR PHONE\SPRD_SPI_GIGADEVICE_GD25Q_4MiB.bin

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

Smart S35 Flash File (Stock Rom) Firmware SPD6531

Smart S35 Flash File (Stock Rom) Firmware SPD6531
Smart S35 Flash File (Stock Rom) Firmware Free Download
Smart S35 Flash File (Stock Rom) Firmware Without Password
Smart S35 Flash File (Stock Rom) Dead Recovery Hang Logo Fix

How To Flash Smart S35 Flash File (Stock Rom) Firmware 
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.
if your mobile not booting computer please use bootkey or miracle boot jig

 

Smart S35 Flash File (Stock Rom) Firmware SPD6531
Smart S35 Flash File (Stock Rom) Firmware Free Download
Smart S35 Flash File (Stock Rom) Firmware Without Password
Smart S35 Flash File (Stock Rom) Dead Recovery Hang Logo Fix Download Here

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : s35
Model Name   : smart
ExtInfo Data : englash
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD25LQ32_englash__s35-smart.bin
Done!

Elapsed: 00:00:54

 

Symphony V44_Firmware (Stock Rom) Flash File MT6580 Android 8.1.0

Symphony V44_Firmware (Stock Rom) Flash File MT6580 Android 8.1.0
Symphony V44_Firmware (Stock Rom) Flash File Free Download
Symphony V44_Firmware (Stock Rom) Flash File Without Password
Symphony V44_Firmware (Stock Rom) Flash File Hang logo Dead Fix
How To Flash Symphony V44_Firmware (Stock Rom) Flash File
 Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


Symphony V44_Firmware (Stock Rom) Flash File MT6580 Android 8.1.0
Symphony V44_Firmware (Stock Rom) Flash File Free Download
Symphony V44_Firmware (Stock Rom) Flash File Without Password
Symphony V44_Firmware (Stock Rom) Flash File Download Here

MT6580_EMMC_Symphony_V44_8_1_0_2019_01_13_12_59)

Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM278)
 Boot mode: Preloader
 BBCHIP: 6580 0 ca00
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x454534454134
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 700100454534454134 : 00000000000000
 EMMC UA SIZE: 0xe2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe2480000       [3.536 GB]
 -Reading GPT Drive OK
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM279)
 Build ID: O11019
 Display ID: V44_HW2_V13
 Version: 8.1.0
 Build Date: 2018年 12月 03日 星期一 20:54:38 CST
 Model: V44
 Brand: Symphony
 Device: V44
 Manufacturer: Symphony
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357003090457782
 IMEI[2] from NVRAM: 357003090457790
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing odmdtbo ......
 Reading:  BEGIN: 0x4600000        - LEN: 0x1000000      
 Start processing vendor ......
 Reading:  BEGIN: 0x6000000        - LEN: 0xbc00000      
 Start processing frp ......
 Reading:  BEGIN: 0x11c00000       - LEN: 0x100000       
 Start processing trustzone
 Start processing nvdata ......
 Reading:  BEGIN: 0x12700000       - LEN: 0x2000000      
 Start processing secro
 Reading:  BEGIN: 0x16a00000       - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0x17800000       - LEN: 0x40000000     
 Start processing sdrpmb ......
 Reading:  BEGIN: 0xdf780000       - LEN: 0x1800000      
 Saved to : C:\Users\arif\Documents\Android_MTK\firmware_backup\MT6580_EMMC_Symphony_V44_8_1_0_2019_01_13_12_59)
 Wait untill phone will start charging.

Walton L6i Flash File (Stock Rom) Firmware Free Without Password

Walton L6i Flash File (Stock Rom) Firmware Free Without Password
Walton L6i Flash File (Stock Rom) Firmware Free Download
Walton L6i Flash File (Stock Rom) Firmware Free Spd 6531E
Walton L6i Flash File (Stock Rom) Hang logo Dead Recovery Fix
How To Flash Walton L6i Flash File (Stock Rom) Firmware 
Follow The Steps.
Step.1.At first you have to do unzip zip File.

Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig
 

Walton L6i Flash File (Stock Rom) Firmware Free Without Password
Walton L6i Flash File (Stock Rom) Firmware Free Download
Walton L6i Flash File (Stock Rom) Firmware Free Spd 6531E
Walton L6i Flash File (Stock Rom) Free Download Here

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\BAR PHONE\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Done!
 

Walton ML13 Flash File (Stock Rom) Firmware Free Without Password

Walton ML13 Flash File (Stock Rom) Firmware Free Without Password
Walton ML13 Flash File (Stock Rom) Firmware Free Download
Walton ML13 Flash File (Stock Rom) Hang Logo Dead Fix File
Walton ML13 Flash File (Stock Rom) Firmware Spd 6531E
How To Flash Walton ML13 Flash File (Stock Rom) Firmware 
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example InfinityBox CM2SCR
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing InfinityBox CM2SCR Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig
 

Walton ML13 Flash File (Stock Rom) Firmware Free Without Password
Walton ML13 Flash File (Stock Rom) Firmware Free Download
Walton ML13 Flash File (Stock Rom) Hang Logo Dead Fix File
Walton ML13 Flash File (Stock Rom) Firmware Spd 6531E Download Here

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\BAR PHONE\SPRD_SPI_GIGADEVICE_GD25Q_4MiB.bin

 

Symphony V28 (Firmware Flash File) Stock Rom_V28_V5_AS

Symphony V28 (Firmware Flash File) Stock Rom_V28_V5_AS
Symphony V28 (Firmware Flash File) Stock Rom Free Download
Symphony V28 (Firmware Flash File) Stock Rom Without password
Symphony V28 (Firmware Flash File) Hang Logo Dead Recovery Fix
How To Flash Symphony V28 (Firmware Flash File) Stock Rom
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SPD_Upgrade_Tool_R4.0.0001
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


 

Symphony V28 (Firmware Flash File) Stock Rom_V28_V5_AS
Symphony V28 (Firmware Flash File) Stock Rom Free Download
Symphony V28 (Firmware Flash File) Stock Rom Without password
Symphony V28 (Firmware Flash File) Hang Logo Fix Download Here


Lenovo A319 After Flash Dead Prolem Fix File Free Download

Lenovo A319 After Flash Dead Prolem Fix File Free Download
Lenovo A319 After Flash Dead Prolem Fix File Without Password
Lenovo A319 Firmware Stock Rom After Flash Dead Prolem Fix
Lenovo A319 Flash File After Flash Dead Prolem Fix
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the MTK usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Lenovo A319 After Flash Dead Prolem Fix File Free Download
Lenovo A319 After Flash Dead Prolem Fix File Without Password
Lenovo A319 Firmware Stock Rom After Flash Dead Prolem Fix
Lenovo A319 Flash File After Flash Dead Prolem Fix Download Here
A319_ROW_DS_S318_150615

We L5 Flash File (Firmware Stock Rom) Android 6.0 Free Download

We L5 Flash File Firmware Stock Rom Android 6.0 Free Download
We L5 Flash File Firmware Stock Rom Android 6.0 Without Password
We L5 Flash File Firmware Stock Rom Android 6.0 Hang Logo Fix
We L5 Flash File Firmware Stock Rom Android 6.0 Pac File

How To Flash We L5 Flash File Firmware Stock Rom
 Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SPD_Upgrade_Tool_R4.0.0001

Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools  Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

We L5 Flash File Firmware Stock Rom Android 6.0 Free Download
We L5 Flash File Firmware Stock Rom Android 6.0 Without Password
We L5 Flash File Firmware Stock Rom Android 6.0 Hang Logo Fix
We L5 Flash File Firmware Stock Rom Android 6.0 Pac File Download Here

Created by Infinity-Box (c) Chinese Miracle II (c) 2018
:::::::::::::::::::::::::::::::::::::::::::::::::::::::
Model Name : sp7731g_1h10_81_df_df013_we_i8_qhd
Model Brand : SPRD
Model Device: sp7731g_1h10_81_df_df013_we_i8_qhd
AndrVersion : 6.0
BaseBand CPU: SP7731GEA
Project Ver : MRA58K release-keys
Model Ext : L5

 

Symphony E76 Flash File (Stock Rom) Firmware

Symphony E76 Flash File (Stock Rom) Firmware E76_XXX_V2_AS
Symphony E76 Flash File (Stock Rom) Firmware Free Download
Symphony E76 Flash File (Stock Rom) Firmware Without Password
Symphony E76 Flash File (Stock Rom) Firmware Hang on logo Dead Fix
How To Flash Symphony E76 Flash File (Stock Rom) Firmware

Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


Symphony E76 Flash File (Stock Rom) Firmware E76_XXX_V2_AS
Symphony E76 Flash File (Stock Rom) Firmware Free Download
Symphony E76 Flash File (Stock Rom) Firmware Without Password
Symphony E76 Flash File (Stock Rom) Firmware Download Here

Zelta D100 Flash File (Stock Rom) Firmware MT6572 -5.1

Zelta D100 Flash File (Stock Rom) Firmware  MT6572 - Android 5.1
Zelta D100 Flash File (Stock Rom) Firmware  Free Download
Zelta D100 Flash File (Stock Rom) Firmware Without Password
Zelta D100 Flash File (Stock Rom) Firmware  Hang Logo Filx
How To Flash Zelta D100 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig





Zelta D100 Flash File (Stock Rom) Firmware  MT6572 - Android 5.1
Zelta D100 Flash File (Stock Rom) Firmware  Free Download
Zelta D100 Flash File (Stock Rom) Firmware Without Password
Zelta D100 Flash File (Stock Rom) Firmware  Hang Logo Filx Download Here


MT6572__Zelta__D100__Zelta_D100__5.1__ALPS.L1.MP6.V2.8_SUNV6572.WE.L_P4
Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201273BCC8072D9
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201273BCC8072D9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 4020B788DA02E3734314D0B3456AB22E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : Zelta
ProdName  : D100
ProdModel : D100
Device    : Zelta D100
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V2.8_SUNV6572.WE.L_P4

[Read Ok] : preloader_d912.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / d912 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1784 MiB
Scatter saved to : C:\Users\md arif\Desktop\SONY-X-BO-V3+\MT6572__Zelta__D100__Zelta_D100__5.1__ALPS.L1.MP6.V2.8_SUNV6572.WE.L_P4\

All done!

Done!
Elapsed: 00:07:25
Reconnect Power/Cable!



Samsung J730F Touch Not working After Update 8.1.0 Fix File

Samsung J730F Touch Not working After Update 8.1.0 Fix File
Samsung J730F Touch Not working Firmware Free Download
Samsung J730F Touch Not working File Without Password
Samsung J730F Touch Not working Fix File By Freeflah .com
How To Flash Samsung J730F Touch Not working Fix File 
Follow The Steps.

Steps.1.Download Samsung Usb Driver then instell Your Computer
if you alrady install skip this step


Steps.2.Download Odin Latest Version
Steps.3. Download  Samsung J730F Touch Not working After Update 8.1.0 Fix File
Steps.4.you have to do unzip zip File.
Steps.5.connect Otg Cable usb mouse on your mobile than 
goto settings about phone build number five tap enable  developer options goto developer options unlock oem enable
Steps.6.power off your mobile goto download mode Press volume Down Home button and Power button Press Volume up To Continue
Steps.7.Connect mobile usb cable to Computer open odin Select ap load to J730F Touch Not working After Update 8.1.0 Fix File Click Start Button After Flash Your Mobile Touch 100% working


Samsung J730F Touch Not working After Update 8.1.0 Fix File
Samsung J730F Touch Not working Firmware Free Download
Samsung J730F Touch Not working File Without Password Download Here

How To Unlock Alcatel 5027B Free Without Box

How To Unlock Alcatel 5027B Free Without Box
Alcatel 5027B Unlock Done Free Without Box
Alcatel 5027B Unlock Without Root Jast 1 Click
How To Unlock Alcatel 5027B Free Without Box

Follow The Steps. 
Step.1 Download  Alcatel 5027B Usb Driver Than Inastell your Computer
Step.2 Download Alcatel 5027B UnlockTools Free Here
you have to do unzip zip File Alcatel 5027B UnlockTools zip
Step.3 goto mobile Settings about phone than tap build number option 7 times
and Then  enable Developer options tap usb debugging 
Step.4 now your phone connect computer 
Step.5 click adb drop to 1 The Tools open you Will Wait phone unlock Automatic
 

Samsung J260 (Frp Lock Bypass) Google Account Lock Remove 2019

Samsung J260 (Frp Lock Bypass) Google Account Lock Remove Done
Samsung J260 (Frp Lock Bypass) Without combination File
Samsung J260 Google Account Lock Remove Without Any Box
Samsung J260 Frp Lock Bypass Free no need Flash No need Dead Risk
How To Bypass  Frp Lock Samsung J260F J260G J260Y J260M  
 Step.1.Download Samsung Frp Tools Update Here
 Step.2.Download Samsung Usb Driver And Instell your computer
Step.3 .Insert A Active Sim Card On Your Mobile And Connect Wifi
 Step.4.Connect Your mobile To computer usb cabel
 Step5.Open the Samsung Frp Tools Click Scan Button goto Dial Type 116 Click Dial Button
Step.6.Flow mobile Skin After End Call Tap To Add To Contacts Tap Share
Tap Google Go  Open A browser 
Step.7.Download google Account Manager 6.1 Here  After Download Click Open And Instell The Apk.
Step.8.Download Quickshortcutmaker Apk. Here After Download Instell The Apk And Open This
Type Google Account manager Tap To Type Google Id And Password Log In Your Gmail And Password
Flows This Videos
 

Kategori

Kategori