FactoryDownload_Tool _R19.17.4301 Free Download

Factory Download_Tool _R19.17.4301 Free Download
Factory Download_Tool _R19.17.4301 Without Password
Factory Download_Tool _R19.17.4301 100% working
Factory Download_Tool _R19.17.4301 pac file tools
SPD Factory Tool R19.17.4301 flash spd cpu Free
Suprot all pac file flash  to your mobile
how to Flash pac File .
1.open. the tools Factory Download_Tool _R19.17.4301.
2.Select pac file click flash button
3.plugin your mobile usb cable press volume + and volume -
4.wait. after full flash plug out your mobile and power on done.

Factory Download_Tool _R19.17.4301 Free Download Here
Factory Download_Tool _R19.17.4301 Without Password
Factory Download_Tool _R19.17.4301 100% working
Factory Download_Tool _R19.17.4301 pac file tools

Airmax A14 Firmware (Stock Rom)Flash File Android 6.0

Airmax A14 Firmware (Stock Rom)Flash File Android 6.0
Airmax A14 Firmware (Stock Rom)Flash File Free Download
Airmax A14 Firmware (Stock Rom)Flash File Without Password
Airmax A14 Firmware (Stock Rom)Flash File 100% Tested
How To Flash Airmax A14 Firmware (Stock Rom)Flash File
 Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig
Airmax A14 Firmware (Stock Rom)Flash File Android 6.0
Airmax A14 Firmware (Stock Rom)Flash File Free Download
Airmax A14 Firmware (Stock Rom)Flash File Without Password
Airmax A14 Firmware (Stock Rom)Flash File Download Here


MT6572_NAND_Airmax__A14___6.0__MP.V1.0
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 278 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008C , [SAMSUNG] KA100O015B_BJTT
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
DEV RID    : 0xB58BA67CA017E913FE172F2DB65D760E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_s23_72_nand_fwvga_yskj_f3_airmax_44.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / s23_72_nand_fwvga_yskj_f3_airmax_44 / NAND
FW Size : 267 MiB

Brand     : Airmax
ProdName  : A14
ProdModel : A14
AndroidVer: 6.0
MTKxCPU   : MT6572
MTKxPRJ   : MP.V1.0

Android Info saved

Scatter saved to : C:\Users\arif\Desktop\New folder\MT6572_NAND_Airmax__A14___6.0__MP.V1.0

Tinmo F3000 Firmware (Stock Rom)Flash File Free Download

Tinmo F3000 Firmware (Stock Rom)Flash File Free Download
Tinmo F3000 Firmware (Stock Rom)Flash File Without Password
Tinmo F3000 Firmware (Stock Rom)Flash File Dead Lcd Fix File
Tinmo F3000 Firmware (Stock Rom)Flash File 100% Tested
How To Flash Tinmo F3000 Firmware (Stock Rom)Flash File
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Tinmo F3000 Firmware (Stock Rom)Flash File Free Download
Tinmo F3000 Firmware (Stock Rom)Flash File Without Password
Tinmo F3000 Firmware (Stock Rom)Flash File Dead Lcd Fix File
Tinmo F3000 Firmware (Stock Rom)Flash File Download Here

MT6580__lmkj__F3000__F3000__5.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Wait for phone...
Phone found! [ 278 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344739305152E6D2A9A12D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 1101003030344739305152E6D2A9A12D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xB58BA67C9307A164F0147B1F4FC48AE5
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : lmkj
ProdName  : F3000
ProdModel : F3000
Device    : F3000
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

[Read Ok] : preloader_aeon6580_weg_l_l200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1295 MiB
Scatter saved to : C:\Users\arif\Desktop\New folder\MT6580__lmkj__F3000__F3000__5.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73\

All done!

LAVA Iris 702 Firmware (Stock Rom) Flash File Android 6.0

LAVA Iris 702 Firmware (Stock Rom) Flash File Android 6.0
LAVA Iris 702 Firmware (Stock Rom) Flash File Free Download
LAVA Iris 702 Firmware (Stock Rom) Flash File Without Password
LAVA Iris 702 Firmware (Stock Rom) Flash File Dead Fix File
How To Flash LAVA Iris 702 Firmware (Stock Rom) Flash File 
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

LAVA Iris 702 Firmware (Stock Rom) Flash File Android 6.0
LAVA Iris 702 Firmware (Stock Rom) Flash File Free Download
LAVA Iris 702 Firmware (Stock Rom) Flash File Without Password
LAVA Iris 702 Firmware (Stock Rom) Flash File Download Here

MT6580__Lava__iris702__iris702__6.0__alps-mp-m0.mp1-V2.34_lava6580.weg.m
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Lava
Device Model   : iris702
Device CPU     : MT6580
Device IntName : iris702
Device Version : 6.0
Device Compile : 6/24/2016 3:56:46 AM
Device Project : alps-mp-m0.mp1-V2.34_lava6580.weg.m
Device ExtInfo : iris702

LAVA Iris 605 Flash File Arter Flash Dead Fix File Free Download

LAVA Iris 605 Flash File Arter Flash Dead Fix File Free Download
LAVA Iris 605 Flash File Arter Flash Blue L.C.D. Fix File
LAVA Iris 605 Flash File Arter Flash Dead Fix File Without Password
LAVA Iris 605 Flash File Arter Flash Dead Fix File 100% Tested
How To Flash LAVA Iris 605 Flash File Arter Flash Dead Fix File Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the Mtk usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

LAVA Iris 605 Flash File Arter Flash Dead Fix File Free Download
LAVA Iris 605 Flash File Arter Flash Blue L.C.D. Fix File
LAVA Iris 605 Flash File Arter Flash Dead Fix File Without Password
LAVA Iris 605 Flash File Arter Flash Dead Fix File Download Here

MT6572__LAVA__iris_605__lava72_sp51__5.1__ALPS.L1.MP6.V1_LAVA6572.WE.L_P47
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : LAVA
Device Model   : lava72_sp51
Device CPU     : MT6572
Device IntName : iris 605
Device Version : 5.1
Device Compile : 11/22/2016 9:40:44 AM
Device Project : ALPS.L1.MP6.V1_LAVA6572.WE.L_P47
Device ExtInfo : iris 605

Samsung Galaxy J7 Prime2 G611F Root File full Free

Samsung Galaxy J7 Prime2 G611F Root File full Free
Samsung Galaxy J7 Prime2 G611F Root File Without password
Samsung Galaxy J7 Prime2 G611F Root File Free Download
Samsung Galaxy J7 Prime2 G611F Root File 100% Tested

How To Root Samsung J7 Prime2 G611F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select TWRP-3.2.1-For-Galaxy-J7-Prime.tar ODIN  and click start button
Step.10.After Pross goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install SuperSU-v2.82 After install. Click Rebot System
now your phone Rooted


Samsung Galaxy J7 Prime2 G611F Root File full Free
Samsung Galaxy J7 Prime2 G611F Root File Without password
Samsung Galaxy J7 Prime2 G611F Root File Free Download
Samsung Galaxy J7 Prime2 G611F Root File Download Here

Note.take backup your phone Data
your phone charge 80%

Samsung J5 Pro J530F Root File Android 7.0 Full Free

Samsung J5 Pro J530F Root File Android 7.0 Full Free
Samsung J5 Pro J530F Root File Without Password
Samsung J5 Pro J530F Root File Android 7.0 100% Tested
Samsung J5 Pro J530F Root File Android 7.0 Free Download

How To Root Samsung J5 Pro J530F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select SM-J530F_7.0_CF Auto_Root. ODIN  and click start button
now your phone Rooted


Samsung J5 Pro J530F Root File Android 7.0 Full Free
Samsung J5 Pro J530F Root File Without Password
Samsung J5 Pro J530F Root File Android 7.0 100% Tested
Samsung J5 Pro J530F Root File Android 7.0 Download Here

Note.take backup your phone Data
your phone charge 80%

Samsung J5 Prime SM-G570F Root File Android 7.0 Full Free

Samsung J5 Prime SM-G570F Root File Android 7.0 Full Free
Samsung J5 Prime SM-G570F Root File Without Password
Samsung J5 Prime SM-G570F Root File 100% Tested
Samsung J5 Prime SM-G570F Root File Free Download

How To Root Samsung J5 Prime SM-G570F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select Twrp Recovery J5 Prime & J7 Prime Nougat 7.0 ODIN  and click start button
Step.10.After Pross goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install Nougat SuperSU J5 Prime & J7 Prime 7.0 After install Click Rebot System
now your phone Rooted

Samsung J5 Prime SM-G570F Root File Android 7.0 Full Free
Samsung J5 Prime SM-G570F Root File Without Password
Samsung J5 Prime SM-G570F Root File 100% Tested
Samsung J5 Prime SM-G570F Root File Free Download Here

Note.take backup your phone Data
your phone charge 80%

Samsung J7 Core J7 Next SM-J701F ROOT File Android 8.0 100% Free

Samsung J7 Core J7 Next  SM-J701F ROOT File Android 8.0 Free
Samsung J7 Core J7 Next  SM-J701F ROOT File Without Password
Samsung J7 Core J7 Next  SM-J701F ROOT File Free Download
Samsung J7 Core J7 Next  SM-J701F ROOT File 100% Tested

How To Root Samsung J7 Core J7 Next  SM-J701F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select TWRP RECOVERY For J7 Nxt.tar ODIN  and click start button
Step.10.After Pross goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install BETA-SuperSU-v2.82 After install Click Rebot System
now your phone Rooted


Samsung J7 Core J7 Next  SM-J701F ROOT File Android 8.0 Free
Samsung J7 Core J7 Next  SM-J701F ROOT File Without Password
Samsung J7 Core J7 Next  SM-J701F ROOT File Free Download
Samsung J7 Core J7 Next  SM-J701F ROOT File Download Here

Note.take backup your phone Data
your phone charge 80%

Samsung J7 j700f Root File Android 6.0 Full Free

Samsung J7 j700f Root File Android 6.0 Full Free
Samsung J7 j700f Root File Android 6.0 Without Password
Samsung J7 j700f Root File Android 6.0 Free Download
Samsung J7 j700f Root File Android 6.0 100% Tested

How To Root Samsung galaxy J7 J700F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so power  off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select twrp-3.0.2-0-j7elte.img ODIN  and click start button
Step.10.After  process goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install BETA-SuperSU-v2.74 After install Click Rebot System
now your phone Rooted

Samsung J7 j700f Root File Android 6.0 Full Free
Samsung J7 j700f Root File Android 6.0 Without Password
Samsung J7 j700f Root File Android 6.0 Free Download
Samsung J7 j700f Root File Android 6.0 Download Here


Note.take backup your phone Data
your phone charge 80%

Samsung J7 Prime G610F Root File Android 7.0 Full Free

Samsung J7 Prime G610F Root File Android 7.0 Full Free
Samsung J7 Prime G610F Root File Android 7.0 Without Password
Samsung J7 Prime G610F Root File Android 7.0 Free Download
Samsung J7 Prime G610F Root File Android 7.0 100% Tested

How To Root Samsung J7 Prime G610F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select TWRP-3.2.1-For-Galaxy-J7-Prime-ODIN  and click start button
Step.10.After Pross goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install SuperSU-v2.82 After install Click Rebot System.
now your phone Rooted

Samsung J7 Prime G610F Root File Android 7.0 Full Free
Samsung J7 Prime G610F Root File Android 7.0 Without Password
Samsung J7 Prime G610F Root File Android 7.0 Free Download
Samsung J7 Prime G610F Root File Android 7.0 Download Here


Note.take backup your phone Data
your phone charge 80%

Samsung S5 G900H Root File Android 6.0 Full Free

Samsung S5 G900H Root File Android 6.0  Full Free
Samsung S5 G900H Root File Android 6.0 Without Passsword
Samsung S5 G900H Root File Android 6.0 Free Download
Samsung S5 G900H Root File Android 6.0 100% Tested

How To Root Samsung S5 G900H
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select twrp-2.8.7.0-g900h-160701-ODIN  and click start button
Step.10.After Pross goto Recovery Mode So Press Volume Up key Home Key and power button
Step.11.Install SuperSU-v2.74. After install Click Rebot System
now your phone Rooted

Samsung S5 G900H Root File Android 6.0  Full Free
Samsung S5 G900H Root File Android 6.0 Without Passsword
Samsung S5 G900H Root File Android 6.0 Free Download
Samsung S5 G900H Root File Android 6.0 Download Here
Note.take backup your phone Data
your phone charge 80%

Samsung S3 GT-I9305 Root File Full Free

Samsung S3 GT-I9305 Root File Full Free Without Password
Samsung S3 GT-I9305 Root File Full Free Download
Samsung S3 GT-I9305 Root File Full Free 100% Tested
Samsung S3 GT-I9305 Root File Full Free Android 4.4.2

How To Root Samsung S3 GT-I9305
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select root file  and click start button
After pross your phone rooted

Samsung S3 GT-I9305 Root File Full Free Without Password
Samsung S3 GT-I9305 Root File Full Free Download
Samsung S3 GT-I9305 Root File Full Free 100% Tested
Samsung S3 GT-I9305 Root File Full Free Download Here

Note.take backup your phone Data
your phone charge 80%

Samsung S6 Edge G925F Root File Full Free Android 6.0

Samsung S6 Edge G925F Root File Full Free Android 6.0
Samsung S6 Edge G925F Root File Without Password
Samsung S6 Edge G925F Root File 100% Tested
Samsung S6 Edge G925F Root File Download Free

How To Root Samsung  S6 Edge G295F
Step.1.Download and install samsung usb Driver on your computer
Step.2.download Root File and Odin Tools
step.3.Extract Zip File Use 7 Zip or Rar 500
Step.4.Enable Developer mode Settings
Step.5.Enable USB Debugging mode on your Phone
Step.6.Enable OEM unlock in The Developer option
Step.7.Now you goto Download mode so powre off your phone
Than press and hold Volume Down Button Home Button And power button
than press volume up
Step.8.connect your mobile usb cable to computer

Step.9.open odin click pda  or ap select root file  and click start button
After pross your phone rooted

Samsung S6 Edge G925F Root File Full Free Android 6.0
Samsung S6 Edge G925F Root File Without Password
Samsung S6 Edge G925F Root File 100% Tested
Samsung S6 Edge G925F Root File Download Here


Note.take backup your phone Data
your phone charge 80%

Hotwav Venus R8 Firmware Flash File (Stock Rom) Free Without Password

Hotwav Venus R8 Firmware Flash File (Stock Rom) Free Without Password
Hotwav Venus R8 Firmware Flash File (Stock Rom) Free Download
Hotwav Venus R8 Firmware Flash File (Stock Rom) Hang Logo Dead Fix
Hotwav Venus R8 Firmware Flash File (Stock Rom) SPD6531 Android 6.0
How To Flash Hotwav Venus R8 Firmware Flash File (Stock Rom)
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Hotwav Venus R8 Firmware Flash File (Stock Rom) Free Without Password
Hotwav Venus R8 Firmware Flash File (Stock Rom) Free Download
Hotwav Venus R8 Firmware Flash File (Stock Rom) Hang Logo Dead Fix
Hotwav Venus R8 Firmware Flash File (Stock Rom) Download Here

Device Brand   : HOTWAV
Device Model   : sp7731c_c7367_fwvga
Device CPU     : sp7731ceb
Device IntName : sp7731c_c7367_fwvga_oversea
Device Version : 6.0
Device Compile : 6/6/2018 10:23:18 PM
Device Project : C7367_HWD_R8_BengalHOTWAV_324_FW_NOGPS_B1_V01.01.B01
Device ExtInfo : Venus_R8



 

Oppo-A71 CPH1717 Firmware Flash File (Stock Rom) DEAD FIX

Oppo-A71 CPH1717 Firmware Flash File (Stock Rom)  DEAD FIX
Oppo-A71 CPH1717 Firmware Flash File (Stock Rom)  Free Download
Oppo-A71 CPH1717 Firmware Flash File (Stock Rom) Without Password
Oppo-A71 CPH1717 After Flash Dead Problem Fix Hang Logo Done
How To Flash Oppo-A71 CPH1717 Firmware Flash File (Stock Rom)
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the Mtk usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig



Oppo-A71 CPH1717 Firmware Flash File (Stock Rom)  DEAD FIX
Oppo-A71 CPH1717 Firmware Flash File (Stock Rom)  Free Download
Oppo-A71 CPH1717 Firmware Flash File (Stock Rom) Without Password
Oppo-A71 CPH1717 Firmware Flash File (Stock Rom) Download Here

WE V4 Firmware & Flash File (Stock Rom) Free Without Password

WE V4 Firmware & Flash File (Stock Rom) Free Without Password
WE V4 Firmware & Flash File (Stock Rom) Free Download
WE V4 Firmware & Flash File (Stock Rom) Frp Bypass Fix
WE V4 Firmware & Flash File (Stock Rom) Hang logo Dead Fix
How To Flash WE V4 Firmware & Flash File (Stock Rom)
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the Mtk usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing  tools Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

How To Bypass Frp WE V4
Step.1.Open SP Flash Tools
Step.2.Select MT6739_Android_scatter.txt
Step.3. Goto Format tab Select manual format flash
Step.4. edit begin address [HEX] 0x2d88000
Step.5.edit Format length [HEX] 0x100000
Step.6. Click Start Button After Format Frp Unlock Done








WE V4 Firmware & Flash File (Stock Rom) Free Without Password
WE V4 Firmware & Flash File (Stock Rom) Free Download
WE V4 Firmware & Flash File (Stock Rom) Frp Bypass Fix
WE V4 Firmware & Flash File (Stock Rom) Download Here

Symphony D38i Flash File (Stock Rom) Firmware Free Download

Symphony D38i Flash File (Stock Rom) Firmware Free Download
Symphony D38i Flash File (Stock Rom) Firmware Without Password
Symphony D38i Flash File (Stock Rom) Firmware Hang Logo
Symphony D38i Flash File (Stock Rom) Firmware Dead Recovery Fix
How To Flash Symphony D38i Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Symphony D38i Flash File (Stock Rom) Firmware Free Download
Symphony D38i Flash File (Stock Rom) Firmware Without Password
Symphony D38i Flash File (Stock Rom) Firmware Hang Logo
Symphony D38i Flash File (Stock Rom) Firmware Download Here

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\SC6531_SPI_GIGADEVICE_GD25Q_4MiB.bin

Done!
Elapsed: 00:00:36

Reconnect Power/Cable!

 

Imam I8 Flash File Stock Rom Firmware MT6572 Android 6.0

Imam I8 Flash File  Stock Rom Firmware MT6572 Android 6.0
Imam I8 Flash File  Stock Rom Firmware Without Password
Imam I8 Flash File  Stock Rom Firmware Free Download
Imam I8 Flash File  Stock Rom Firmware Hang Logo Dead Fix
How To Flash Imam I8 Flash File  Stock Rom Firmware MT6572 Android 6.0
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Imam I8 Flash File  Stock Rom Firmware MT6572 Android 6.0
Imam I8 Flash File  Stock Rom Firmware Without Password
Imam I8 Flash File  Stock Rom Firmware Free Download
Imam I8 Flash File  Stock Rom Firmware  Download Here 

MT6572_NAND_IMAM__i8__i8__6.0__ALPS.KK1.MP7.V1 

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 278 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008C , [SAMSUNG] KA100O015B_BJTT
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xB58BA67CEB510F9279D203D5CC92F7B2
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

[Read Ok] : preloader_yuanda72_cwet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
FW Size : 248 MiB

Brand     : IMAM
ProdName  : i8
ProdModel : i8
Device    : i8
AndroidVer: 6.0
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

Android Info saved

Scatter saved to : C:\Users\arif\Desktop\New folder\MT6572_NAND_IMAM__i8__i8__6.0__ALPS.KK1.MP7.V1

Done!
 

Samsung Galaxy J4 SM-J400F Country Unlock File Full Free Download

Samsung Galaxy J4 SM-J400F Country Unlock File Full Free Download
Samsung Galaxy J4 SM-J400F Country Unlock File Without Password
Samsung Galaxy J4 SM-J400F Country Unlock File Network unlock Fix
Samsung Galaxy J4 SM-J400F Country Unlock File No Need Credit
How To Flash Samsung Galaxy J4 SM-J400F Country Unlock File
Step.1.Download And Install Samsung U.S.B. Driver on Your Computer
Step.2.You Need A Box for example Z3x Or Octoplus Box.
Step.3.Open Your Box Tools Z3x Or Octoplus Box. Select Flash File AP.CP. CSC
Step.4.Now Click Flash Button After Flash Your Phone Unlock

Samsung Galaxy J4 SM-J400F Country Unlock File Full Free Download
Samsung Galaxy J4 SM-J400F Country Unlock File Without Password
Samsung Galaxy J4 SM-J400F Country Unlock File Download Here

Walton MM19J Flash File (Stock Rom) Firmware SPD6531E

Walton MM19J Flash File (Stock Rom) Firmware SPD6531E
Walton MM19J Flash File (Stock Rom) Firmware Free Download
Walton MM19J Flash File (Stock Rom) Firmware Without Password
Walton MM19J Flash File (Stock Rom) Hang Logo Dead Recovery Fix
How To Flash Walton MM19J Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


Walton MM19J Flash File (Stock Rom) Firmware SPD6531E
Walton MM19J Flash File (Stock Rom) Firmware Free Download
Walton MM19J Flash File (Stock Rom) Firmware Without Password
Walton MM19J Flash File (Stock Rom) Download here
SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

Read Ok, 8388608 bytes

Saved to : C:\Users\arif\Desktop\New folder\SC6531_SPI_GIGADEVICE_GD25Q_8MiB.bin





Walton MH15 Flash File (Stock Rom) Firmware MT6261

Walton MH15 Flash File (Stock Rom) Firmware MT6261
Walton MH15 Flash File (Stock Rom) Firmware Free Download
Walton MH15 Flash File (Stock Rom) Firmware Without Password
Walton MH15 Flash File (Stock Rom) Hang Logo Dead Recovery Fix
How To Walton MH15 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig


Walton MH15 Flash File (Stock Rom) Firmware MT6261
Walton MH15 Flash File (Stock Rom) Firmware Free Download
Walton MH15 Flash File (Stock Rom) Firmware Without Password
Walton MH15 Flash File (Stock Rom) Download Here

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 66 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : F39ED7A8A3BFBF983BC580F25F0106D7
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : TIANQIN61M_11C_PCB01_gprs_MT6261_S00.WALTON_OLVIO_MH15_V05_20171108.bin
FileVersion : Walton_Olvio_MH15_V05_20171108
Saved to : C:\InfinityBox\CM2MTK\Read_out\TIANQIN61M_11C_PCB01_gprs_MT6261_S00.WALTON_OLVIO_MH15_V05_20171108.bin

 

Tinmo F200 Flash File (Stock Rom) Firmware SPD 6531E

Tinmo F200 Flash File (Stock Rom) Firmware SPD 6531E
Tinmo F200 Flash File (Stock Rom) Firmware Free Download
Tinmo F200 Flash File (Stock Rom) Without Password
Tinmo F200 Flash File (Stock Rom) Hang logo Dead Recovery Fix
How To Flash Tinmo F200 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Tinmo F200 Flash File (Stock Rom) Firmware SPD 6531E
Tinmo F200 Flash File (Stock Rom) Firmware Free Download
Tinmo F200 Flash File (Stock Rom) Without Password
Tinmo F200 Flash File (Stock Rom) Download Here
 1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Tinmo F288 Flash File Firmware (Stock Rom) SPD6531E

Tinmo F288 Flash File Firmware (Stock Rom) SPD6531E
Tinmo F288 Flash File Firmware (Stock Rom) Free Download
Tinmo F288 Flash File Firmware (Stock Rom) Without Password
Tinmo F288 Flash File Firmware Hang Logo Dead Recovery Fix
How To Flash Tinmo F288 Flash File Firmware (Stock Rom)
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Tinmo F288 Flash File Firmware (Stock Rom) SPD6531E
Tinmo F288 Flash File Firmware (Stock Rom) Free Download
Tinmo F288 Flash File Firmware (Stock Rom) Without Password
Tinmo F288 Flash File Firmware Download Here

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\arif\Desktop\New folder\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Done!
Elapsed: 00:00:55


Itel It5231 Flash File (Stock Rom) Firmware Spd 6531

Itel It5231 Flash File (Stock Rom) Firmware Spd 6531
Itel It5231 Flash File (Stock Rom) Firmware Free Download
Itel It5231 Flash File (Stock Rom) Without Password
Itel It5231 Flash File (Stock Rom) Hang logo Dead Recovery Fix
How To Flash Itel It5231 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Itel It5231 Flash File (Stock Rom) Firmware Spd 6531
Itel It5231 Flash File (Stock Rom) Firmware Free Download
Itel It5231 Flash File (Stock Rom) Without Password
Itel It5231 Flash File (Stock Rom) Download Here
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 14 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Read Flash Content
Read Ok , collect info
Platform : MOCOR_12C.W13.04.14_Debug
G243_it5231_64X64_240X320BAR_EnBd_BD
Project  : IT5231-G243-EnBd-BD-20161209
HWInfo   : fp6531_bar
Compile  : 12-09-2016 18:44:52
Set FileInfo :
Model Vendor : Itel
Model Name   : it5231
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00800000_MOCOR_12C.W13.04.14_Debug_G243_it5231_64X64_240X320BAR_EnBd_BD_12092016184452__Itel-it5231.bin
Done!


 

Samsung J8 Frp Lock Remove Google Account Lock Bypass

Samsung J8 Frp Lock Remove  Google Account Lock Bypass
How To Remove Frp lock Samsung J8
How To Remove Frp Lock Google Account Lock Samsung J8
Samsung J8 Frp Lock Remove Google Account Bypass Done
Follow The Steps. 
Step.1. you need a android mobile Android 7.0.
Step.2.Download And install PB.FRP-com Apk.
Step.3.cannact wifi on your lock mobile.
Step.4.Insert sim a active on lock mobile.
Step.5. Download And install PB.FRP-com Apk.
Step.6.Send link www.youtube .com on Insert sim a active sim namber.
Step.7.Send puss sms open automatic you Jast Prss Ok open youtube.
Step.8.type mobile doctor 360 play fast video open description link jast click link.
Step.9.automaticle open chrome browser search quickshortcutmaker And Download apk.
Step.10.open  automatic quickshortcutmaker apk install it.
Step.11.type Home Press Home open to Try you go to home skin.
Step.12.search google account manager 6.0 or 8.0 apk Download The Apk and install it.
Step.13.open  quickshortcutmaker type google account manager.
Step.14.you log in your gmaile id .power off your phone power on agin your phone.
Step.15.you bypass google account lock. just rest your phone settings.

Download PB.FRP-com Here
Download quickshortcutmaker apk Here
Download Google Account Manager 8.0 Here
                                Videos Link 
 

InfinityBox Install CM2MT2 V2.04 Download Free

InfinityBox Install CM2MT2 V2.04 Download Free
InfinityBox Install CM2MT2 V2.04 Without Password
Infinity CM2MT2 v2.04: New chips and features activated !

Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated 
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated

FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated

MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )

Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify  ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing

InfinityBox Install CM2MT2 V2.04 Download Here

Symphony b17I Flash File (Stock Rom) Firmware MT6261

Symphony b17I Flash File (Stock Rom) Firmware MT6261
Symphony b17I Flash File (Stock Rom) Free Download
Symphony b17I Flash File (Stock Rom) Without Password
Symphony b17I Flash File Hang Logo Dead Recovery Fix
How To Flash Symphony b17I Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

Symphony b17I Flash File (Stock Rom) Firmware MT6261
Symphony b17I Flash File (Stock Rom) Free Download
Symphony b17I Flash File (Stock Rom) Without Password
Symphony b17I Flash File (Stock Rom) Firmware Download Here

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 66 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 29E21CC231C2DECFF7CDB5AE610A9525
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : HONGYU61M_11C_PCB01_gprs_MT6261_S00.B17I_HW1_V5.bin
FileVersion : B17I_HW1_V5
Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gprs_MT6261_S00.B17I_HW1_V5.bin

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

 

5Star GR7 Flash File (Stock Rom) Firmware MT6261

5Star GR7 Flash File (Stock Rom) Firmware MT6261
5Star GR7 Flash File (Stock Rom) Firmware Free Download
5Star GR7 Flash File (Stock Rom) Firmware Without Password
5Star GR7 Flash File (Stock Rom) Firmware Hang Logo Dead Fix
How To Flash 5Star GR7 Flash File (Stock Rom) Firmware
Follow The Steps.
Step.1.At first you have to do unzip zip File.
Step.2.Then open a flashing tool for example SP Flash Tools
Step.3.Installs the spd usb driver on your computer.
  if you alrady install skip this step
Step.4.Select the flash file at flashing box tools or crack Click Write Flash
Step.5.Push the USB in your phone without battery.
Step.6.At last you must be setup the battery needed typing booting mode then will be start flashing
Step.7.if your mobile not booting computer please use bootkey or miracle boot jig

5Star GR7 Flash File (Stock Rom) Firmware MT6261
5Star GR7 Flash File (Stock Rom) Firmware Free Download 
5Star GR7 Flash File (Stock Rom) Firmware Without Password
5Star GR7 Flash File (Stock Rom) Firmware Download Here 
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 66 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 392F227900BD420166C9366F8954E152
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.L2016_XSD_W21_PLUS_5STAR_GR7_V2_0_20180925.bin
FileVersion : L2016_XSD_W21_PLUS_5STAR_GR7_V2.0_20180925
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.L2016_XSD_W21_PLUS_5STAR_GR7_V2_0_20180925.bin

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!


Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download

Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download
Nokia C2-03 RM-702 Flash File (Stock Firmware) Without Passwod
Nokia C2-03 RM-702 Flash File Hang Logo Dead Recovery Fix
Nokia C2-03 RM-702 Flash File (Stock Firmware) 100% Tested
How To Flash Nokia C2-03 RM-702 Flash File (Stock Firmware) 
Follow The Steps.  
Step.1.Dwonload the file
Step.2.unzip use7 zip
Step.3.install nokia connectivity cable driver software 

Step.4.Then open a flashing tool for example infinity box best atf box Ufs Box  
Step.5.Select the flash file at flashing tool.
Step.6.Push the USB in your phone without battery.
Step.7.At last you must be setup the battery needed typing booting mode then will be start flash 


Nokia C2-03 RM-702 Flash File (Stock Firmware) Free Download
Nokia C2-03 RM-702 Flash File (Stock Firmware) Without Passwod
Nokia C2-03 RM-702 Flash File Hang Logo Dead Recovery Fix
Nokia C2-03 RM-702 Flash File (Stock Firmware) Download Here

Nokia 6301 Flash File (Stock Rom) Firmware RM-322

Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Nokia 6301 Flash File (Stock Rom) RM-322 Free Download
Nokia 6301 Flash File RM-322 Hang logo Dead Fix File
Nokia 6301 Flash File Firmware RM-322 Without Password
How To Flash Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Follow The Steps.  
Step.1.Dwonload the file
Step.2.unzip use7 zip
Step.3.install nokia connectivity cable driver software 

Step.4.Then open a flashing tool for example infinity box best atf box Ufs Box  
Step.5.Select the flash file at flashing tool.
Step.6.Push the USB in your phone without battery.
Step.7.At last you must be setup the battery needed typing booting mode then will be start flash 



Nokia 6301 Flash File (Stock Rom) Firmware RM-322
Nokia 6301 Flash File (Stock Rom) RM-322 Free Download
Nokia 6301 Flash File RM-322 Hang logo Dead Fix File
Nokia 6301 Flash File Firmware RM-322 Download Here

InfinityBox CM2SPD V1.27 Free Download

InfinityBox Install CM2SPD V1.27 Free Download
=== v1.27 ===
Infinity Chinese Miracle-2 SPD/Spreadtrum v1.27 - SC773x Android 7 and FP Forensic

 SP Platform:

 Activated SC773x Android 7 support
 Identify (service/boot)
 Read firmware ( SC/PAC )
 Write Firmware ( SC/PAC )
 Reset Settings/Format FS
 Reset FRP
 Flash erase
 NVM operations: Read, Write, Clear, Fix BB
 Repair Security (Normal and Flash Mode)
 SP Unlock
 eMMC test
 HW info read/write

- Service operations improved
 FRP reset improved

- Firmware reader updated
 New types supported

 FP Platform:

- Main
 Revised bootloader package
 Booting issues on some models should be fixed

- Unique UserData fatures activted!
 SC6500, SC6530, SC6531: Activated Direct PhoneBook recovery/extraction!
  Automatic detection of different phonebook types
  Support recovery for deleted/changed records !
  It's possible to make recovery for device with ANY state as soon as it can be connected to PC ( except Format FS / Dump reflash )

 SC653x Samsung: Revised PhoneBook recovery/extraction
  Support recovery for deleted/changed records !

- Other
 Some bugfixes and improvements at all
 FlashLoader package updated
InfinityBox Install CM2SPD V1.27 Free Download Here

InfinityBox Install CM2SCR V1.03 Free Download

InfinityBox Install CM2SCR V1.03 Free Download
Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated

Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices

Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.
InfinityBox Install CM2SCR V1.03 Free Download Here

InfinityBox Install CM2QLM v1.16 Free Download

InfinityBox Install CM2QLM v1.16 Free Download
Infinity Chinese Miracle-2 QLM v1.16 - Lot of new models and features !

New CPU support
 Qualcomm MSM 8905 (Mobile Platform 205)
 Qualcomm MSM 8609 (SnapDragon 210)
 Qualcomm MSM 8953 (SnapDragon 625 pro)

Supported CPU List:
 Qualcomm MSM 8210 (SnapDragon 200)
 Qualcomm MSM 8212 (SnapDragon 200)
 Qualcomm MSM 8610 (SnapDragon 200)
 Qualcomm MSM 8612 (SnapDragon 200)
 Qualcomm MSM 8226 (SnapDragon 400)
 Qualcomm MSM 8626 (SnapDragon 400)
 Qualcomm MSM 8926 (SnapDragon 400)
 Qualcomm MSM 8228 (SnapDragon 400)
 Qualcomm MSM 8628 (SnapDragon 400)
 Qualcomm MSM 8928 (SnapDragon 400)
 Qualcomm APQ 8009 (SnapDragon 210)
 Qualcomm MSM 8209 (SnapDragon 210)
 Qualcomm MSM 8609 (SnapDragon 210)
 Qualcomm MSM 8905 (Mobile Platform 205)
 Qualcomm MSM 8909 (SnapDragon 210)
 Qualcomm MSM 8916 (SnapDragon 410)
 Qualcomm MSM 8917 (SnapDragon 425)
 Qualcomm MSM 8929 (SnapDragon 415)
 Qualcomm MSM 8936 (SnapDragon 610)
 Qualcomm MSM 8937 (SnapDragon 430)
 Qualcomm MSM 8939 (SnapDragon 615)
 Qualcomm MSM 8940 (SnapDragon 435)
 Qualcomm MSM 8974/A/AA/AB (SnapDragon 801)
 Qualcomm MSM 8952 (SnapDragon 617)
 Qualcomm MSM 8953 (SnapDragon 625/pro/plus)
 Qualcomm MSM 8956 (SnapDragon 650)
 Qualcomm MSM 8976 (SnapDragon 652)
 Qualcomm MSM 8976 Pro (SnapDragon 653)
 Qualcomm MSM 8992 (SnapDragon 808)
 Qualcomm MSM 8994 (SnapDragon 810)
 Qualcomm MSM 8996 (SnapDragon 820)
 Qualcomm MSM 8996 Pro (SnapDragon 821)
 Qualcomm MSM 8998 (SnapDragon 835)

- Main
 FH Protocol updated and revised
 Core revised, no more stuck boot problems
 MSM8953 Pro new revision supported
 MSM8905 supported
 MSM8609 supported
 Test support: SDM660
 Test support: SDM630

- Flasher
 SafeRegions detection improved
 Factory firmware handling optimized

- More Secure and Generic types supported
 +50 UNIQUE loaders included in internal DB!
 Now QLM cover 230+ UNIQUE SECURE AND GENERIC TYPES! As nobody else :)
 Software DO NOT require any kind of manual loaders selection, bruteforce etc.
 MSM8909: ZTE, Asus, Alcatel and some Oppo
 MSM8916: Coolpad, Alcatel and some Oppo
 MSM8976: Vivo and others
 MSM8953: Vivo and others
 MSM8956: Generic Secure Chinese types, Alcatel, Lenovo and some others
 MSM8936: Cover more Cyanogen based models ( include WileyFox and some rest )
 MSM8937: Asus and other secure types
 MSM8998: Nokia 8, and other Xiaomi models
 MSM8905: Generic, LYF and other secure types

- Service operations improved
 Enabled QCN operations
  - Allow read calibrations and secure memory in XQCN format
  - Allow write calibrations and security memory in XQCN format
  - QCN verify, automatic security field update
 Enabled Security repair feature
  - Default "Clean memory mode" for start. Use with backup, wipe and restore
 Basic DiagInfo reading during Diag operations
 ADB layer activated
 Enable Diag mode option released
  - Allow enable diagnostic port on device [ ROOT REQUIRED! ]

- Firmware Reader engine updated
 A/B memory architecture supported - allow read FW from newer devices with Android A/B update system!
 New types supported ( brand-specific and generic types )
 Files verification revised

 -> Unlike other "solutions" CM2 make FIRMWARE BUT NOT A USELESS PLAIN DUMP ( i.e. cloning )
 -> That means all device unique data, security etc. will remain safe after flashing !
 
- MemoryTool updated
 Optimized WIPE operations
 Fixed some VCL errors on Win7
 BootConfigaration revised

- Other
 DataDirect engine updated
 Loader database updated
  - 50+ new secure loaders
  - Updated old and generic loaders
 Some other improvements and fixes
 Better UFS memory details logging

- Notes
  -> Nokia QLM: since Nokia use own format of security and memory/ota structure - for COMPLETE service you should use BEST!
     QLM offer basic support: FRP, Reset, Identify and backup features
  -> Special THANKS to ALL our users who help us with sending reports, reporting problems and bugs, help with files and other things ! 
InfinityBox Install CM2QLM v1.16 Free Download Here

Kategori

Kategori